Applicable for all models of Brother Printers. Sorry, I still not yet tried this method because very difficult to get Brother Printer, this is possible cause of the printer is not popular printer. For everyone that having Brother Printer, I hope this post can assist your.

Disconnect the power cord from your Brother Printer.
Press Set button, while holding the Set button re-connect the power to your printer
The Error code will be display “Machine Error 46″
If the Error code appear, press the “arrow up button” ( ^ ) there will be numbers that are going to be display.
Choose 8 then press Set Button
Press Arrow Up button again then choose Zero (0) and press Set Button Again, now you will enter Service Mode.
Press “Mono Key/Button” 25 times or until “Purge Counter Appear”
Now press arrow up (^) again then choose “2″ press Set Button
Press Arrow Up (^) again then choose “7″ press Set Button
Press Arrow Up (^) again then choose “8″ press Set Button
Press Arrow Up (^) again then choose “3″ press Set Button
The purge counter will be reset to Zero.
Now Press Stop/Exit Button
You will return to Machine Error 46
Press Arrow Up (^) then choose 9 press Set Button
Press Arrow Up (^) again then once more choose 9 press Set Button
Your Printer will reset then wait until it power up again.
Source: Indoreset Yahoo Group

this is my first blog

this is my first blog